Small Jewelry Drills

Posted in shining by Roman on May 25, 2006 No Comments yet

small jewelry drills

Drilling Holes In Beach Stones To Use For Beads

When drilling beach stones, I would suggest you avoid the advice about buying the best drill bit you can find. When drilling stone, diamond bits wear out quickly, whether you buy the twisted ones (expensive) or the straight ones (far less expensive.)  So go for the straight ones.

I’d suggest you go for the economy diamond cylinder drill packs from Rio. They come 25 in a pack and cost less than a buck each, compared to $2 or $4 each for twist bits.  You can get through five or six stones with a single bit if the stones are not too hard.

Start your hole with a diamond ball burr, say 1 mm Hold the stone underwater with your hands in a small plastic bin, like Tupperware or glad disposable. Make a small, round divot in the stone.

Once you have a achieved a small divot, drill through the stone in with your cylinder diamond drill bit. Unless your stone is very small, avoid any bit less than 1 mm. The .75 mm bits have a tiny shaft and break often. The 1 mm bits have a reasonably strong shaft.

To make sure you don’t drill through the bottom of your container, put a couple of pop sickle sticks under your stone. Hold the stone under water, on top of the pop sticks. Use clear water so you can see what you are doing. The top of the stone should be just barely under water.  As you drill, a long tail of dust will drift off from your stone in the water.  Press a little, pull back a little, and get a rhythm going. When you get 4/5ths of the way through, turn the stone over to see where the hole is going to come out. Mark it with a sharpie, knick that place with a ball bur and start drilling from the back. When the hole meets the other side, everything else becomes easy.

Widen the hole with successively larger (cheap) diamond drill bits, drilling under water. I find a 2.5 mm hole holds a nice rivet and makes a nice pendant.

About the Author

Hi, I am Aftab Ahmed an IT student in NUTS University Islamabad, Pakistan. I also have some experience and a lot of interest in fashion designing and jewelry work. www.pakjewelry.net

History of Drill. Mechanical Phase


Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic


Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool – Glass, Stone, Ceramic


$1.10


Professional Quality, 1/8 in. Shank, 180 Grit. Includes 20 assorted shapes covered with diamond particles. All bits have 1/8 in. shanks and come in convienient plastic holder. Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials….

Boxer 30 Pcs 4mm Precision Screwdriver Set


Boxer 30 Pcs 4mm Precision Screwdriver Set


$8.99


30 Pcs 4mm Precision Screwdriver Set Including T-3,T-4,T-5& Pozi PZ0 For Cell phone, laptop , clock etc….

Dremel 225-01 Flex Shaft Attachment


Dremel 225-01 Flex Shaft Attachment


$23.79


A true must-have accessory for all hobbyists and do-it-yourselfers, the Dremel 225 Flex Shaft Attachment has a flexible, 36-inch shaft that attaches easily and adds an improved level of versatility to your project capabilities. Easy to handle and hold, it fits Dremel tool models 400, 398, 395, 300, 285, 275, and 800, and works with the collet system and the Dremel chuck..caption {font-family: Verd…

Weiman Products LLC Stainless Steel Wipes (30 ea)


Weiman Products LLC Stainless Steel Wipes (30 ea)


$2.99


Weiman Stainless Steel Wipes remove fingerprints for a streak free finish. These are fantastic for contemporary stainless steel appliances such as dishwashers, microwaves, stoves, refrigerators and grills. They also work well on steel artwork and mirrors! These Weiman wipes are an easy and convenient way to protect, shine and clean. Just wipe in the direction of the metal grain and buff with a sof…

8'' PCB Push Hand Drill Pin Vise Dremel W/ Extra chuck Watch Jewelry Repair Tool


8” PCB Push Hand Drill Pin Vise Dremel W/ Extra chuck Watch Jewelry Repair Tool


$8.99


- Brand new push hand drill For close drilling of small works.
- Drill Size from 0.7 up 1.6mm.
- Made of brass with black Aluminum Handle.
- It is 180 mm = 8” long with 3 times rotation in a stroke.
- At bench provided with one extra chuck.
- Push down to operate.
- The listing is for only one piece….

Elenco Rock Driller


Elenco Rock Driller


$22.95


Making your own jewelry just became a whole lot easier thanks to this nifty rock driller kit. It lets you safely drill rocks or shells for your own collection or make crafts and jewelry for your family and friends. It features an exclusive safety dome that protects small fingers from the drilling mechanism. This kit includes everything you need to get started, including the drill, a replacement dr…

General Tools 500 Cordless Ultra Tech Power Precision Screwdriver


General Tools 500 Cordless Ultra Tech Power Precision Screwdriver


$16.39



Fiskars 8511 6984 PowerGrip Hand Drill


Fiskars 8511 6984 PowerGrip Hand Drill


$7.99


Ideal for drilling holes in hard to reach and delicate spots. Comfort grip design; fits standard drill bits. Side crank with enclosed gears. Smooth operating gear system is completely enclosed in durable ABS housing….
Leave a Comment